![]() Detection remains operable during the adjustment mode.Lower Sensitivity settings are recommended to prevent detection of highly mineralized grounds.To exit adjustment mode, press and hold the button for 2 seconds - indicated by a dual-tone beep (dual vibrate in Silent Mode), or wait 5 seconds for automatic exit. 3 beeps = maximum Sensitivity, with audio.2 beeps = medium Sensitivity, with audio (Default setting).1 beep = minimum Sensitivity, with audio.Repeatedly press the button to cycle through the 6 settings: The first button press after entering adjustment mode indicates the current setting. (Note: In Silent Mode, beeps are replaced by vibration pulses.) To enter adjustment mode, press and hold the button () for 2 seconds-indicated by a single beep followed by a dual-tone beep and flashing LED. The Garrett Pro Pointer AT has three Sensitivity settings and two detection settings: Audio-plus-Vibrate or Vibrate-only (silent). Press and hold the button for a half second until you hear a single beep (or single vibration in Silent Mode), indicating power down. You will hear 2 beeps and the LED () will remain on. Press and release the button () while holding the detector away from any metallic objects. We found that the supplied battery will be empty quickly and the pinpointer will start behaving erratic, a new battery solves that problem immediately. We do recommend to keep an extra 9V battery on hand as the supplied battery is always only partially full. Your Garrett Pro Pointer AT comes with a 9V battery already pre-installed and ready to use. In the following getting started guide we'll explain the settings and configuration to get the most of your pinpointer. The Garrett Pro-Pointer AT or sometimes called the Garrett Carrot is a great, easy to use pinpointer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |